best way to apply varnish to wood floor
If you plan on removing the varnish and then painting the wood, sanding can be an effective way to get rid of the varnish while prepping the wood at the same time. it’s also a natural and chemical-free way to remove varnish. it can however be labour intensive. all you need to do is start with 150-grit sandpaper and sand the entire surface.. Whether you use a solvent-based or water based stain, the best way to apply it to a wood floor is to use a rag. wipe it on, using a swirling motion, and wipe of the residue with a second rag, going with the wood grain to avoid swirl marks that will show up under any clear finish you apply.. Apply the first coat of thinned varnish and let it dry. use a flat paintbrush or foam applicator to apply the varnish to the wood. use long, even strokes, and work along the wood grain. let this first coat dry for 24 hours. if you are using a spray on varnish, hold the can 6 to 8 inches away from the surface and spray on a light, even coat..
best way to apply varnish to wood floor
Use a method called “water popping” in which you run a wet mop or cloth over the newly-sanded floor to raise the grain; this will cause the wood to better accept the stain. allow approximately 30 minutes drying time before staining.. Step 3: liberally apply wood stain using a porous sponge or rag, apply the stain liberally to the floorboards. as you did with the mopping, start on one side and go with the grain to create a.
