woodworking making a wooden spoon
All the tools you need to carve a wooden spoon. i already had the gouge, spokeshave and mallet, but i bought the carving knives specifically to make spoons. after looking around online at several great examples of carving knives, i arrived at the knives made by del stubbs at pine wood forge in leonard, minnesota. del has made thousands of. Step 2 – trace the spoon pattern onto the wood with a pencil or marker. i used a store-bought spoon and used it to trace out the pattern i wanted. pick a location on the board that will allow you to get multiple spoons. with the dimensions of this board, i should be able to make up to 4 spoons. step 3 – cut the spoon out on the bandsaw. if. If making a stirring or serving spoon, i would recommend finding a piece of wood between 1/2″ (1.3cm) and 3/4″ (1.9cm) thick, and approximately 12″ (30 cm) in length, and 2.5” (6cm) in width. as shown below, you might want to make two spoons from a single board..
woodworking making a wooden spoon
Eventually i found out that traditional wooden spoons are lap-carved from green wood, but i was already well on my way to developing a method that worked well in dry hard- woods. i have since made hundreds of spoons and spatulas in many sizes, from two-foot-long stirring spoons to two-inch tasting spoons. spoon making is also fast.. Wooden spoons make wonderful gifts. people especially love when the wood is from a tree or a limb that they gave you. with a bandsaw, any limb wood can produce good spoon blanks. it provides them with a connection to the nature that they had known and come to love..
